Energy-Efficient Membrane Bio-Reactors

HUBER Vacuum Rotation Membrane VRM® Bioreactor

Membrane bio-reactors (MBR) are modified activated sludge systems, whereby secondary clarifiers are replaced by membrane filters.

  • MBR systems combine biological wastewater treatment with membrane filtration and disinfection.
  • Mixed-liquor solids concentration is increased by a factor of 3 - 5 and tank volume reduced to 20 – 35 %.
  • Ultra-filtration membranes retain all solids and bacteria; effluents are of excellent quality.
  • Power consumption of MBR-systems is 40 – 80 kWh/(PE•a), whereof about 50 % is consumed by membrane filter operation.
  • Membrane scouring air introduces some oxygen into the wastewater so that oxygen supply by fine bubble aeration can be reduced.
  • Increased mixed-liquor concentration lowers aeration alpha-factors (e.g. from 0.7 to 0.5) and thus aeration efficiency.
  • These two effects approximately cancel each other out.
  • MBR-systems increase power consumption by around 10 % in comparison with conventional biological treatment + sand filtration + disinfection.
  • MBR-systems should be used where plant footprint is limited and/or where excellent effluent quality is required.

Since membrane filters are major power consumers, installation of energy-efficient units is very important.

The table shows power consumption of a HUBER Vacuum Rotation Membrane VRM® Bioreactor for a 20,000 PT plant in comparison with those of competitors.

Effluent Flow

HUBER VRM

Competition

Qav = 140 m³/h

0,32 kWh/m³

0,45 kWh/m³

Qmax = 220 m³/h

0,23 kWh/m³

0,40 kWh/m³

Qmin = 30 m³/h

0,31 kWh/m³

0,43 kWh/m³