水腔入门: 压力门

在饮用水领域内,构筑技术和卫生标准要求在水腔内安装可以抵抗囤积水的入门。当池箱液位上下不断波动情况下,此入口必须稳定防水。
HUBER 可为此入口提供优化处理后的压力门。此门内外两侧配置十分容易操作的磨擦门锁或者配置中央门锁。防水能力至 10 m 水柱, 可囤积水,可两侧浇铸混凝土 (采用食品卫生等级的密封材料)。
全套压力门由不锈钢材料制成, 并在浸泡池内酸化和钝化处理。

抗压门, 矩型 TT 7关闭

Rectangular Pressure-Tight Door TT7 with Locking Levers

Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 10 m.

Pressure-tight door, pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 280 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified.

 

抗压门, 矩型,配置中央门锁TT 7.Z关闭

Rectangular Pressure-Tight Door TT7.Z with Central Lock

Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 10 m.

Pressure-tight door, pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified.

Registered design no. 298 01 144.1
 

抗压门, 圆型TT 7.R关闭

Round Pressure-Tight Door TT7.R with Screw Locks

Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 10 m.

Pressure-tight door, pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides, round, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified.

 

技术信息

技术信息

尺寸图

尺寸图

经验报告

图片

图片

 
 

产品

咨询产品进一步信息